• Check that you have set zones. Movement is only detected within the created zones. If no zones are set, motion is detected over the entire image. Zones can be used to ignore unwanted motion in images. (think: busy streets, trees, pets) or to specifically detect in certain places such as a door or seating area.
    1. Open the   'HomeWizard camera' app.
    2. Press 'Menu' at the top right of the window of the camera.
    3. In the menu of the camera, press 'Motion detection'
      • You enter the 'Motion Detection' setting screen
        • Press 'Detection zones'. 
        • You will see the screen of the camera. Press'Add zones'
          1. Press and drag on the '' of the frame to move the detection zones
          2. Use the triangle at the bottom right of the frame to enlarge or reduce the detection zone
          3. Use '' to remove the detection zones.  
        • You can add up to 3 zones.


IMPORTANT

When using the detection zones, the image is always displayed horizontally. This means that your smartphone always has to be tilted.


  • Check whether the Sensitivity or not too low or too high is set for your application.
    1. Open the   'HomeWizard camera' app.
    2. Press 'Menu' at the top right of the window of the camera.
    3. In the menu of the camera, press 'Motion detection'
      1. You enter the 'Motion Detection' setting screen.
        • Press 'Sensitivity'. to install the different sensitivities.
        • Press Minimal, Low, Medium, High or Maximum depending on your preference.


PAY ATTENTION

You receive a maximum of one detection notification per 10 minutes.